Posted in Blushing bride, Retiring, Smokey Slate, Thank You, Tuscan vineyard, water colour pencils

Tuscan Vineyard thank you cards

I recently got the Tuscan vineyard stamp set from Stampin’ Up! and made a few thank you cards with it. I combined it with the Succulent garden designer paper (retiring May 31st), but the stamp set is also great for colouring, gift tags or even masculine cards.

IMG_5708IMG_5707

 

 

 

 

 

 

 

 

 

 

I used following products from Stampin’ Up!
Card on the left:

Card on the right:

The card on the left is straight forward to make. I stamped the grapes with basic black from straight on to the designer paper and glued it on the smoky slate cardstock, put in on the card with dimensionals. I stamped the sentiment straight on the whisper white and layered in on the Bushing bride before glueing it on to the cardbase.

The card on the right is simple to make to but has a few more steps. I stamped the grapes with basic black twice, first on the piece of whisper white and then on a piece of scrap designer paper. I cut the grapes (not the leaves) out from the designer paper with scissors and glued it on top of the stamped grapes on the whisper white cardstock. I used the old olive water colour pencil to colour in the leaves. I then stamped the sentiment in blushing bride, added pearls and layered the cardstock together.

I love the Tuscan vineyard stamp set and will definitely be using it to make more cards for my blog.

Card is from the 24th April 2017.

Posted in Blushing bride, Mint Macaroon, Petite Petals, Retiring, Rich razzleberry, Smokey Slate, Timeless Textures

Petite Petals (retiring) card

I made this card for my fiance’s aunt in California to thank her for everything she did when we visited her earlier this year. We had a great time wine tasting and being spoiled!

I adore the Petite Petals stamp set and the matching punch which unfortunately are retiring soon or until stock runs out. I combined it with Timeless Textures and All Things Thanks stamp sets. I like how the sentiment springs out of the flowers. I also added Mint Macaroon, Blushing bride Glimmer paper and Blushing Bride Twine which all will be discontinued from 31st of May!

This card looks great and it’s very easy to make as well if you have recently started stamping this is a great card to make. i just like how the sentiment pops out of the flowers. Here’s the list of products I used:

The card is straight forward stamping. You can use the stampmajig to get everything lined up more precise, but I didn’t use it for this card.
1) I stamped the sentiment first, so it’s right where I wanted it 2) Stamp leafy texture stamp with mint macaroon, 3) Glued the front to the piece of blushing bride 4) Tied on twine 5) I glued it all on the front of the card base.
6) The flowers I stamped on scrap paper 7) Punched them out, if you got no punch then use scissors! 8) Folded the flower petals with a bone folder to give it a bit of shape 9) Attached them with glue dots 10) Added rhinestones.

Card is from 19th April 2017.

Posted in Balloon, Balloon Celebration, Better Together, Birthday, Blushing bride, Gift card, Party Animal Designer Series Paper, Pear Pizzazz, Retiring, Sending Love Glassine Sheets, Smokey Slate, So Saffron, Soft Sky, Stitched Framelits

Cute Party Animal Gift Card

IMG_5715My aunt in Denmark gave me a gift card she had made and I thought it was awesome and had to make a similar one with Stamping’ Up! of course! I have added all the measurements for this card in this post too! I like how the sentiment on the front looks like a cloud and the Better Together birthday greetings goes so well with the Party Animal Designer Series Paper.

I used following supplies: (I know huge list, but some of it is retiring so check it out!)

A how to guide is below these pictures..

This is how I did it:
1) Glue DSP on the card base 2) Fold the 12 in on the score lines. You want it folded like if you wanted it pop out of a box.
3) Add DSP to pocket piece and use an oval framelit to make the “incut”. I use a magnetic plate for this on the big shot, but you can also use tape to keep die in place. 4) Add snail adhesive to the edge of three sides of the pocket and stick it on the last bit of the folded piece. Make sure you do not cover the whole thing in glue or glue the opening. You want to make sure you can put something in the pocket. 5) Optional: stamp 2 small balloons just above the pocket in So Saffron.
6) Stamp the “Wishing you happiness on your special day” and party hat in Smoky Slate on the middle piece. To be honest I used the Stampamajig to make sure the hat was stamped in the right place.
7) Glue on the front DSP piece. I also trimmed the sides a bit because I didn’t fold it that well. I cut off whatever could be seen from the front when folded. 8) Stamp “Happy Birthday” in Smoky Slate on Sending Love Glassine sheet (make sure it’s dry) and cut out with oval Stitched framelit
9) On a piece of scrap Whisper White stamp 3 small balloons in So Saffron, 2 small balloons in Pear Pizzazz, 1 big balloon in So Saffron, Soft Sky and Blushing Bride. On the big balloons I stamped the dotted shading in same colours. Use punch to punch out balloons.
10) Position where you want the sentiment and glue on with a tiny bit of snail adhesive at the edges. Note too much adhesive might be visible from front as it’s see through. 11) Lay out balloons as you want them. The small balloons I positioned at the back and glued on with tombow glue. The big balloons I positioned so the overlay the sentiment a little. I put these on with dimensionals.
12) Fold and tie on the ribbon. Position where you want the ribbon. I wanted it to tie in the balloons, so pretty much in the middle. Then glue it, with ribbon tied, on to the card base. You can now untie and add gift card.
13) Finito!

If you wanted to you could make the card base into a card too. You would then need to cut the Whisper White card base 10 x 5 in and score it at 5 in. Or you can leave out the stamping in the middle and write a greeting there. Or write greeting on the back! So many options!

Card is from the 25th April 2017.

Posted in Blushing bride, flowers, Retiring, Smokey Slate, Special reason, Thank You

Special reason (retiring) thank you card

I am on a Blushing bride and Smokey slate roll, so here’s another one!
This time I added a bit of glimmer paper too. Blushing bride glimmer paper and special reason bundle are both retiring the 31st May 2017 or until stock lasts. Special reason bundle is one of my favourite retiring items and I will be using it in the future as well!

I have sent this card to my Aunt in Alaska who I visited on holiday in the States in February/March.

IMG_5577

For this card I used following Stampin’ Up! products:

This card is not the easiest card to assemble because you want the three squares lined up perfectly beneath each other. What I did was laying them out first as where I wanted them to be. I then glue top and bottom square and align them so the border to the two card edges are lined up with same distance. I then glue the middle piece and make sure it has same distance to the top and bottom squares and is lining up with the edge of the card as well. It is a bit fiddly.
Putting the sentiment on with dimensional stickers is easy. The flower I just glued on, and I used tombow glue, to glue the outline of flower to glimmer paper. Just saying because some has experienced issues sticking stuff to glimmer paper.

Card is from 30th March 2017.

Posted in Beautiful you, Blushing bride, Smokey Slate, Thank You

Beautiful you thank you card

Yay, my first post on my new blog! Let’s celebrate with a beautiful thank you card.

Blushing bride and Smoky slate are my favourite colour combination at the moment. Together they look delicate and elegant and for that reason I made an easy, simple, light card.

IMG_5575.PNG
Let’s put on Abba with Danicing Queen!

I like the Beautiful you stamp set. There are so many options for every season of the year. Mostly for girly cards though but there are a lot of girls out there too!

For this card I used following Stamping’ Up! products:

I love the technique for the dress. It’s very easy. The stamp is stamped twice, once on the card and once on Falling in love dsp, then fuzzy cut out dress with hair and and in one piece and glued it on the stamped image on the whisper white. First time I saw this technique was by Brandy and it blew me away.
I thought by putting on the embellishment it would look like a ball, making the card more lively. Makes it look like the lady is dancing with the ball. Maybe she’s a gymnast/dancer or just really happy it is spring?! 🙂
Card is from 27th March.
Posted in Blushing bride, SAB2017, Special reason, Thank You

SAB thank you card

Only 3 days left of Stamping’ Up!’s Sale a bration period so I thought I would show a card I made by using one of the items from the SAB catalogue.

I love the big thank you stamp. It is very elegant and very versatile. I love the colour combination, makes me think of spring. I was inspired by this card by Bonnie I found on Pinterest.

This is what Stamping’ Up! products I used to make this card:

I used the dimensionals to pop up the smoky slate from the base and making sure I didn’t get any lumps on the front from the twine as it is a bit bulky. I also used dimensionals for the flower on the front.
I wish I had adjusted the twine a bit before taking the photo!
Oh well, we learn as we go. 🙂
Card is from the 27th March 2017.